Tips for Restarting Your Boiler
You want your boiler to stay calm when you switch it back on after the summer. So, remember some of these suggestions.
#1 Do a Boiler Servicing
An engineer registered with Gas Safe should service your boiler once a year.
Additionally, scheduling a Central Heating Repairs service in the summer is brilliant. You could receive a lower price from a heating professional since they often have more time available.
A boiler service will alert a professional to any possible issues before the winter months. This will save you from having a broken boiler when you most need it.
#2 Restart Your Boiler Gradually
To avoid a buildup of junk if your boiler has been idle throughout the summer, try to fire it up once or twice a month. When the weather turns colder, this will alert users of any possible problems before turning it back on permanently. If you haven't been doing this and the weather is manageable now, you might light it a few times during the next several weeks.
#3 Your Radiators should be Bled If Necessary
If your radiators have ceased functioning correctly throughout the summer, you won't notice since they have yet to be turned on. You may need to bleed your radiators to eliminate any trapped air if you notice that one or more aren't warming up in particular places.
It's also important to remember that thermostatic radiator valves, which are used to switch on and off the heating system, might become stuck if they are closed for an extended period when it comes to radiators. Throughout the summer, keep them open as much as possible.
#4 Keep the Heat the Same Slowly
As soon as we begin to feel cold, it might be tempting to turn the heat up. However, doing so can result in you setting the temperature higher than is necessary and squandering both money and energy.
Instead, attempt to increase the heat one degree at a time. Generally speaking, you should set your thermostat to a temperature that makes you feel comfortable. This is typically between 18 and 21 degrees Celsius for most homes.
Additionally, keep in mind that raising the thermostat will result in a more significant temperature in your home rather than a quicker heating-up process.
#5 Look for Any Boiler Issues
Your boiler is most prone to experience issues throughout the summer when there are a lot of downtimes.
#6 Minimal Boiler Pressure
Your boiler will only start if the pressure is high enough. By observing the pressure gauge, you may determine the boiler pressure. It should ideally fall between 1 and 2 bars. Your boiler will have low pressure if it is any lower than 1.
The good news is that you can raise the pressure on your own. Check out our article on raising boiler pressure. Check for any leaks in the heating system before you increase the pressure. Turn off the main water supply and summon a heating specialist if you discover a leak.
#7 Kettling
When you turned on the heat, did you hear a sound like a kettle? That being the case, kettling is strongly indicated. Sludge or lime scale accumulation on the heat exchanger of the boiler might result in a problem.
The heat exchanger may overheat, steam, and boil due to a buildup of this kind that restricts water flow.
Central Heating Repairs will be required to clean the heat exchanger if this is the situation. They could also suggest installing a magnetic filter, which will remove any particles before they have a chance to accumulate.
Conclusion
When you come to turn on your boiler after it has been turned off for the summer, it may have acquired problems, or in the worst situation, it won't function at all.